Infrared energy experts AbegSun
German product direct from the manufacturer
Manufacturer: ABEG Anlagen GmbH
Falkensteinstr. 13A • 34132 Kassel
Administration phone: +49 561 50811
Infrared energy experts AbegSun
German product direct from the manufacturer
Manufacturer: ABEG Anlagen GmbH
Falkensteinstr. 13A • 34132 Kassel
Administration phone: +49 561 50811
Die von Dir gewünschten Heizungen können auf dieser Seite in eine Angebotsanforderungs-Liste eingetragen und an uns versandt werden.
Wir machen für Dich individuelle, eng kalkulierte Preise und geben Dir darüber ein schriftliches Angebot per E-Mail. Nach der Lieferung bekommst Du eine Rechnung.
Die in der Angebotsanfrage sichtbaren Preise sind unverbindliche Richtpreise (UVP). Sie entsprechen nicht den Preisen in unseren individuellen Angeboten.
Du kannst in der Liste auch nur ein einzelnes, beliebiges Produkt auswählen und uns einen Grundriss (Plan oder Handyfoto) zuschicken – wir wählen dann die erforderlichen Heizungen für Dich aus und schicken danach das Angebot an Dich per E-Mail.
Wenn Du unser Angebot per E-Mail, per Telefon oder schriftlich annimmst, schicken wir Dir eine Auftragsbestätigung auf dem gleichen Weg, jedoch immer schriftlich. Danach ist der Auftrag gemäß unseren Allgemeinen Geschäftsbedingungen (siehe in der Fußzeile unten) rechtsgültig erteilt.
Eine Abwicklung gemäß den Richtlinien des Internethandels erfolgt nicht. Die dort vorgesehenen Vorauszahlungs- und Rückgabevereinbarungen gelten nicht. Du erhälts nach Auslieferung von uns eine Rechnung, für die wir allerdings eine umgehende Zahlung erbitten.
Um die Größe von Heizkörpern zu berechnen, gibt es zwar für Warmwasserheizungen eine DIN, für Strahlungsheizungen jedoch nicht. Die erforderliche Größe muss über die Raumgrößen in Abhängigkeit vom Nutzungszweck (Wohnen, Schlafen, Kind, Gast, Bad usw.) bestimmt werden.
Wird bei einer Strahlungsheizung die DIN der Warmwasser-Konvektionsheizung nach den Regeln der Thermodynamik zur Berechnung verwendet, ergeben sich falsche Werte. Strahlungsheizungen unterliegen quantenphysikalischen Berechnung nach der Steffen-Bolzmann-Formel.
Eine Hilfestellung für die Auswahl der benötigten Heizungen erhältst Du durch die seitlich mitlaufende Tabelle zur „Berechnung der Heizungsgrößen“. Dort kannst Du mit einem Klick die erforderliche Größe der Heizelemente ablesen und über den Button „Zur Angebotsanfrage“ mit Angabe der Stückzahl in die Anfrageliste eintragen.
Achtung: sei ruhig großzügig; denn eine größere Heizung verbraucht nicht mehr. Sie schaltet entsprechend früher ab. Du bist jedoch auf der sicheren Seite bei niedrigen Außentemperaturen. Die Preisunterschiede zwischen den Größen sind minimal.
Die Auswahl ist auch deswegen unkritisch, weil sich eine Infrarotheizung äußerst flexibel an die Wärmebedürfnisse der Bewohner anpassen lässt.
Die unterschiedlichen Produkte der AbegSun Infrarotheizungen:
All AbegSun infrared heaters have the same basic elements:
010-OT-Infrared-Heating-Standardelement 600 Watt without Thermostat
This is the smallest and cheapest AbegSun heater. It has no thermostat and no built-in radio receiver. It is designed to be integrated into an existing smart home system. The Smart Home switch for switching the heater on/off can be mounted on top of the aluminum housing of the heater and connected with the supplied Wago click terminals.
Caution - infrared heating should not be operated without thermostat control for energy reasons!
011-OT-Infrared heating standard element 900 Watt without thermostat
This heater has no thermostat and no built-in radio receiver. It is intended to be integrated into an existing Smart Home system. The actuator of the on-site smart home system must be installed as described above for product 010.
Caution - infrared heating should not be operated without thermostat control for energy reasons!
012-OT Infrared heating standard element 1200 Watt without thermostat
This heater has no thermostat and no built-in radio receiver. It is intended to be integrated into an existing Smart Home system. The actuator of the on-site smart home system must be installed as described above for product 010.
Caution - infrared heating should not be operated without thermostat control for energy reasons!
020-WS infrared wall heating 600 Watt plug-in thermostat
Wall heater with approx. 2.5 m mains cable and plug thermostat for the wall socket. - This wall heater is very easy to operate and install with a thermostat that can be plugged into any wall socket.
However, it is important to remember that the power cable is visible if the heater is not mounted above the socket. The fact that the thermostat is supplied as a mobile device means that the temperature can be controlled flexibly from anywhere in the room. You don't have to go to the socket to set the temperature.
021-WS Infrared wall heating 900 Watt plug-in thermostat
Wall heater with approx. 2.5 m mains cable and plug thermostat for the wall socket. - This wall heater is very easy to operate and install with a thermostat that can be plugged into any wall socket.
However, it is important to remember that the power cable is visible if the heater is not mounted above the socket. The fact that the thermostat is supplied as a mobile device means that the temperature can be controlled flexibly from anywhere in the room. You don't have to go to the socket to set the temperature.
022-WS Infrared wall heating 1120 Watt plug-in thermostat
Wall heater with approx. 2.5 m mains cable and plug thermostat for the wall socket. - This wall heater is very easy to operate and install with a thermostat that can be plugged into any wall socket.
However, it is important to remember that the power cable is visible if the heater is not mounted above the socket. The fact that the thermostat is supplied as a mobile device means that the temperature can be controlled flexibly from anywhere in the room. You don't have to go to the socket to set the temperature.
030-ST infrared floor heater 600 Watt with plug-in thermostat and base plate
Portable parking heater with approx. 2.5 m mains cable and plug thermostat for the wall socket. - This wall heater requires no assembly and is very easy to operate with a plug that can be plugged into any socket.
The heater has a very attractive glass plate as the lower base plate. This is made of toughened glass and its weight ensures the stability of the heater. The heater has a large radiation area due to its curved surface.
Der Vorteil einer Standheizung ist auch, dass man die Heizung in jeder beliebigen Entfernung vom Körper aufstellen kann, um so die Wärmemenge zusätzlich zur eingestellten Temperatur zu beeinflussen.
031-ST Infrared parking heater 900 Watt with plug-in thermostat and base plate
Portable parking heater with approx. 2.5 m mains cable and plug thermostat for the wall socket. - This wall heater requires no assembly and is very easy to operate with a plug that can be plugged into any socket.
The heater has a very attractive glass plate as the lower base plate. This is made of toughened glass and its weight ensures the stability of the heater. The heater has a large radiation area due to its curved surface.
Der Vorteil einer Standheizung ist auch, dass man die Heizung in jeder beliebigen Entfernung vom Körper aufstellen kann, um so die Wärmemenge zusätzlich zur eingestellten Temperatur zu beeinflussen.
032-ST Infrared floor heater 1120 Watt with plug-in thermostat and base plate
Portable parking heater with approx. 2.5 m mains cable and plug thermostat for the wall socket. - This wall heater requires no assembly and is very easy to operate with a plug that can be plugged into any socket.
The heater has a very attractive glass plate as the lower base plate. This is made of toughened glass and its weight ensures the stability of the heater. The heater has a large radiation area due to its curved surface.
Der Vorteil einer Standheizung ist auch, dass man die Heizung in jeder beliebigen Entfernung vom Körper aufstellen kann, um so die Wärmemenge zusätzlich zur eingestellten Temperatur zu beeinflussen.
040-MTD Infrared ceiling heater 600 Watt with radio thermostat
Ceiling heating with high radiant power and maximum achievable efficiency. This is most effective with ceiling-mounted infrared heaters, as no convection heat is generated. A floor area of approx. 32 square meters is radiated from a ceiling height of 2.5 m. After some time of use, the warming of the floor (measured 24.2 - 24.8° C) creates the effect of underfloor heating.
Installation is simple. Mounting material including template for the dowel holes and Wago click terminals are supplied.
041-MTD-Infrarot-Heizung-Deckenelement 900 Watt mit Thermostat
Ceiling heating with high radiant power and maximum achievable efficiency. This is most effective with ceiling-mounted infrared heaters, as no convection heat is generated. A floor area of approx. 32 square meters is radiated from a ceiling height of 2.5 m. After some time of use, the warming of the floor (measured 24.2 - 24.8° C) creates the effect of underfloor heating.
Installation is simple. Mounting material including template for the dowel holes and Wago click terminals are supplied.
042-MTD-Infrarot-Heizung-Deckenelement 1120 Watt mit Thermostat
Ceiling heating with high radiant power and maximum achievable efficiency. This is most effective with ceiling-mounted infrared heaters, as no convection heat is generated. A floor area of approx. 32 square meters is radiated from a ceiling height of 2.5 m. After some time of use, the warming of the floor (measured 24.2 - 24.8° C) creates the effect of underfloor heating.
Installation is simple. Mounting material including template for the dowel holes and Wago click terminals are supplied.
050-LED infrared ceiling heater 600 Watt with radio thermostat + on/off LED switch
Ceiling heating with high radiant power. This is most effective with ceiling-mounted infrared heaters, as no convection heat is generated. A floor area of approx. 32 square meters is radiated from a ceiling height of 2.5 m. After some time of use, the warming of the floor (measured 24.2 - 24.8° C) creates the effect of underfloor heating. Delivery includes installation material.
In practical terms, ceiling heaters are connected to the connections of the previous ceiling lighting. If you do not want to do without the ceiling light, the heater can be fitted with an LED light strip running around the back. This is switched on and off using a separate switch supplied (no batteries required).
051-LED infrared ceiling heater 900 Watt with radio thermostat + on/off LED switch
Ceiling heating with high radiant power. This is most effective with ceiling-mounted infrared heaters, as no convection heat is generated. A floor area of approx. 32 square meters is radiated from a ceiling height of 2.5 m. After some time of use, the warming of the floor (measured 24.2 - 24.8° C) creates the effect of underfloor heating. Delivery includes installation material.
In practical terms, ceiling heaters are connected to the connections of the previous ceiling lighting. If you do not want to do without the ceiling light, the heater can be fitted with an LED light strip running around the back. This is switched on and off using a separate switch supplied (no batteries required).
052-LED infrared ceiling heater 1120 Watt with radio thermostat + on/off LED switch
Ceiling heating with high radiant power. This is most effective with ceiling-mounted infrared heaters, as no convection heat is generated. A floor area of approx. 32 square meters is radiated from a ceiling height of 2.5 m. After some time of use, the warming of the floor (measured 24.2 - 24.8° C) creates the effect of underfloor heating. Delivery includes installation material.
In practical terms, ceiling heaters are connected to the connections of the previous ceiling lighting. If you do not want to do without the ceiling light, the heater can be fitted with an LED light strip running around the back. This is switched on and off using a separate switch supplied (no batteries required).
060-MTW infrared wall heating 600 watt with radio thermostat
Wall heating with short rear mains cable with Wago click terminals. It can be connected directly to a power connection in the wall behind the heating, e.g. in the case of a renovation where a night storage heater was previously installed.
The heating is controlled using the same built-in electronic radio technology as the ceiling heating.
061-MTW infrared wall heater 900 watts with radio thermostat
Wall heating with short rear mains cable with Wago click terminals. It can be connected directly to a power connection in the wall behind the heating, e.g. in the case of a renovation where a night storage heater was previously installed.
The heating is controlled using the same built-in electronic radio technology as the ceiling heating.
062-MTW infrared wall heating 1120 Watt with radio thermostat
Wall heating with short rear mains cable with Wago click terminals. It can be connected directly to a power connection in the wall behind the heating, e.g. in the case of a renovation where a night storage heater was previously installed.
The heating is controlled using the same built-in electronic radio technology as the ceiling heating.
070-ST infrared heater with built-in radio thermostat and base plate - 600 watts
Portable parking heater with approx. 2.5 m mains cable with plug. This parking heater does not require any installation and is very easy to operate. As with the AbegSun ceiling and wall heaters, the heater has a built-in radio receiver that can be controlled via the mobile room thermostat. This enables the heating to be controlled via a weekly program.
The heater has a very attractive glass plate as the lower base plate. This is made of toughened glass and its weight ensures the stability of the heater. The heater has a large radiation area due to its curved surface.
071-ST Infrared heater with built-in radio thermostat and base plate - 900 watts
Portable parking heater with approx. 2.5 m mains cable with plug. This parking heater does not require any installation and is very easy to operate. As with the AbegSun ceiling and wall heaters, the heater has a built-in radio receiver that can be controlled via the mobile room thermostat. This enables the heating to be controlled via a weekly program.
The heater has a very attractive glass plate as the lower base plate. This is made of toughened glass and its weight ensures the stability of the heater. The heater has a large radiation area due to its curved surface.
072-ST infrared heater with built-in radio thermostat and base plate - 1120 watts
Portable parking heater with approx. 2.5 m mains cable with plug. This parking heater does not require any installation and is very easy to operate. As with the AbegSun ceiling and wall heaters, the heater has a built-in radio receiver that can be controlled via the mobile room thermostat. This enables the heating to be controlled via a weekly program.
The heater has a very attractive glass plate as the lower base plate. This is made of toughened glass and its weight ensures the stability of the heater. The heater has a large radiation area due to its curved surface.
080-STS-SET Plug switch set with separate thermostat
Der Steckerschalter wird in eine Stromsteckdose mit 230 Volt eingesteckt. In die Steckdose des Steckerschalters wird das Netzkabel der Infrarotheizung gesteckt.
Danach wird der mobile Thermostat in die Nähe des Steckers gehalten, bis sich die beiden Geräte verbunden (gepaart) haben. Dieser separate Thermostat hat den Vorteil, dass die Temperatur von jeder Stelle des Raumes aus geregelt werden kann ohne den Zwang, zur Steckdose gehen zu müssen. Die Steuerung der Heizung über ein Wochenprogramm ist bei diesem Gerät jedoch nicht möglich.
081-FTS-SET Radio thermostat set with radio switch
This set consists of a mobile thermostat with a small base and a radio switch (also known as an actuator). The actuator is permanently installed in the AbegSun infrared heaters. The SET is installed as standard in all AbegSun infrared heaters from article number 020. It can be controlled manually or via a weekly program
082-EAW-SET On/off radio switch set with additional radio switch
This switch with radio receiver can be used to switch a light source that is not part of the infrared heating element on or off in a room. Any lighting can thus be switched independently of the infrared heating.
Der Schalter kann an der Wand (in der Regel neben der Tür) befestigt werden oder auch mobil benutzt werden. Er benötigt keine Batterien.
083-EAS switch On/Off radio wall switch, single
The switch for a room input and output is supplied as standard with every LED heating element.
This additional switch is required if the living room has several inputs and outputs. The LED lighting of the infrared heating can be switched from an additional input. This then provides the same radio signal as the switch, which is already present as standard on delivery and has been installed on the wall next to another door in the room.
